Mecha/Steampunk Jack Skellington for all to enjoy
happy printing! I included the describe .txt but i've included it here as well
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Tough Cream White Transmission Distance: 10
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Tough Cream White Transmission Distance: 10
Swap Instructions:
Start with Charcoal
At layer #21 (1.04mm) swap to Dark Blue
At layer #30 (1.4mm) swap to Ash Gray
At layer #37 (1.68mm) swap to Cream White
At layer #47 (2.08mm) swap to Silver
At layer #57 (2.48mm) swap to Cream White for the rest.