EN:
I created this model using Fusion 360. STL is provided in here.
Use PLA, or any other material you'd like.
I recommend to use a drop of glue on top of the wooden stick. (If the stick is too thick, you might use some force or a small knife)

DE:

Ich habe dieses Modell mit Fusion 360 erstellt, die STL findet ihr hier.
Ich verwendete PLA, andere Materialien sind aber auch möglich.
Einen kleinen Tropfen Kleber würde ich am Holzstab anbringen. (Wenn der Stab zu groß ist, kann man ihn auch etwas abschnitzen, mit einem Messer o.Ä.)

Source for the sticks: I used Bamboo/Wooden sticks with 6mm diameter i found here: https://amzn.to/45dUezs
Source for the filament:

For PLA in Red i can recommend SUNLU PLA+ as its easy to print on most machines: https://amzn.to/3te8LxU

For PLA in Pink i would recommend eSUN PLA+: https://amzn.to/48E7lwy

*those are affiliate links, so when you were ordering trough one of those links, i will get a small comission. This is without any charge for you.
And of course: Feel free to use the model with other materials, colors.