This is my first printinplace model for the Honeycomb Wall. I want a drillholder that is tilts forward so that I can see and grip the drills better.

The drillholder is for drills from 1mm - 13mm with steps of 0.5mm. On top is a labeling for the drill diameter. The upper pegs are designed to print without support, because they should only prevent the holder from tipping forward.

I print the holder with the Bambu X1 in ABS with two colors. The clearance for the hinges fit for me with 0.15mm.

It can happen that the filament connects in the guide. Then simply press the two sides slightly outwards with light pressure so that it loosens.

Step-File is provided.