Absolutely wonderful print. It took me some time to realize there were supports to remove, but they came out soooooo cleanly. 

Manatee3D

0.2mm layer, 3 walls, 25% infill

penz1805

Jonesi

cover

DSC00960.JPG

DSC00961 - Cop6776y.JPG

DSC009586575.webp

plate_1.webp

plate_2.webp

plate_3.webp

plate_1.png

plate_2.png

plate_3.png

Printing settings:&nbsp;Trashcan <ul><li>0.20 mm layer height</li><li>Wall loops 3 </li><li>infill 15% gyroid</li></ul>Trashcan top <ul><li>0.20 mm layer height</li><li>Wall loops 4 </li><li>infill 25% gyroid</li></ul>Trashcan lid <ul><li>0.20 mm layer height</li><li>Wall loops 4 </li><li>infill 25% gyroid</li></ul>For supports use tree auto!

Trash can with lid. To the toilet for example.&nbsp;Installing lid:Put other side in place and apply carefully pressure on top of the hinge. it clicks in place. &nbsp;Max measures:<ul><li>Height 250 mm</li><li>length 200 mm</li><li>Width 140mm</li></ul>

Trash can with lid

Global

Print Profile(1)

Description

Comment & Rating (2)

License

Related Models

Can Lid -SMALL AND FLAT- V2

"Merry-Jar-Wanna"

Can Lid for 0,33 and 0,5L Print in Place

Bulli can with lid