Monstera Prints
This is an artistically created print of a close-up of a monstera leaf
Suitable for this 150x150mm frame. https://makerworld.com/en/models/57319
This artwork requires 4 colors of filament: Green, Light Green, Yellow, and White.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Green Transmission Distance: 2
PLA BambuLab Basic BambuLab Green Transmission Distance: 8
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Green
At layer #8 (0.72mm) swap to BambuLab Green
At layer #12 (1.04mm) swap to Yellow
At layer #18 (1.52mm) swap to Jade White for the rest.