Hotend fan duct X1C & X1
Copyright Claim
Hotend fan duct X1C & X1
Boost
69
143
39
Print Profile(3)
PETG 0.2mm layer, 2 walls,
Designer
18 min
1 plate
ABS 0.2mm layer, 2 walls
Designer
13 min
1 plate
PETG 0.2mm layer, 3 walls, 10% infill
21 min
1 plate
Boost
69
143
39
1
223
133
Released
Description
Due to hotend design there is problem, that hotend fan can take air to cool down from bad places where is hot air, like bellow from around heatblok and heatbed and that can lead to melt filament too soon before heatblok and cause clog. So to prevent this heat creep I designed a little fan duct to prevent that. Its made to take air directly from the side of hotend housing. Its made simply to just screw directly to part cooling fan, than you can assemble front hotend housing as normal. Hope it will help you.
Print from PETG or ABS for better heat resistance.
There is also model for P1P/P1S in my published models: https://makerworld.com/de/models/91769#profileId-98170
Comment & Rating (39)
All
Print Profile
PETG 0.2mm layer, 2 walls,
Nice design, fits snug inside my X1C. Printed in ABS I had leftover, quick and easy print.
The designer has replied
2
Reply
I'm glad you like it :)
(Edited)1
Reply
Print Profile
PETG 0.2mm layer, 2 walls,
je teste
1
Reply
Print Profile
PETG 0.2mm layer, 2 walls,
World great and prints quick! What more could I ask for?
1
Reply
Me agrado mucho el diseño, es muy fácil de poner y esta perfecto.
Tienes mucha razón en la cuestión de los flujos de aire así que no está de más poner una pequeña mejora en eso. :D
1
Reply
Print Profile
PETG 0.2mm layer, 3 walls, 10% infill
Printed well with Elegoo PETG.
0
Reply
很好～
缺點就是熱端線路會卡到，必須小修一下比較安全
0
Reply
Couldn't the fan be bolted to the duct to make hotend replacement easier?
2
Reply
exactly my thought there's plenty of room in the screws to add it.
0
Reply
Print Profile
ABS 0.2mm layer, 2 walls
not super sure this really does anything, but giving it a try.
1
Reply
Print Profile
PETG 0.2mm layer, 2 walls,
Nice
1
Reply
Print Profile
PETG 0.2mm layer, 2 walls,
Printed well in PETG.
1
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (1)
Related Models
© 2024 MakerWorld