Inspired by different project and found it totally useless - I decided to make my own laser bed for NEJE laser.
Its for bed 10x9cm.
I added these lines to have better overview on items which will be placed there - like some small linear.
You will need additional M3 screws for this project - please keep that in your mind.
I found this project really usefull to make engraves repeatable, especially when we need to do lot of the same items.
I suggest to print if from the top to bottom, so lines on bottom, and then rest. I think no supports are needed here.
If you need clear lines - then cut the print just after few first layers and use some contrast filament next.