A solution to hold all of your bottles and cans
Various sizes from 20mm up to 60mm available in step file format.
Printer profile has the maximum amount of plates available, consisting of 20mm up to 55mm.
Simple design which scales the height of the holder as the bottle or can diameter increases.
They are a nice tight fit once pushed onto the honeycomb inserts so be assured they wont fall out, when you remove from your wall you will take the insert with it 👍
Each one has its own plate, if on the app you will see the diameter on plate 1 is 20mm. See picture below for the phone app and bambu studio…
You will need to print the single honeycomb inserts on plate 4 from the original designer here and shown pictured below….. https://makerworld.com/en/models/22521#profileId-27457
You will notice I have my Honeycomb wall in the wrong direction as shown below as it worked best for my needs on a 1200x600 board. I used these to change the direction… https://makerworld.com/en/models/45417#profileId-47143
If anyone wants smaller or larger diameters I can add those to the collection👍