This is a set of two STLs to print one decorative endcap for the Aquatic Life T5HO hybrid light. The total length is just over 18" so I cut in two parts and print it on the flat end to avoid supports. You will need to drill/tap your connecting bar for mounting screws. I made no effort to align my mounting holes with the holes already drilled in some of the OEM connecting bars. I used M4 machine screws and tapped the connecting bar as that is what I had on hand. The holes could be drilled to anything close to that size to fit what you have.
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
Yes
Supports:
No