I was missing a "limiter" 4 the angle stop of my Festool tks 80 EBS.

It is quite annoying to do repeatable cuts without it.

In addition to the printed parts you will need

M5 x 20 (25?) Screw + Nut

M4 x 20 Screw + Washer

Print the Stop with 100% infill and 3 perimeters to make it as stable as possible. (Use stiff filament ,-) Not TPU xD)

Insert the Stop in the right orientation! (The aluminium profile is not built symmetrically!)

Have fun and keep printin!