First thank you for your rating. Are you aware, that you can scale the model in bambu studio? You can simply scale the model a wee bit up in the direction you want. Just untick the box, so you scale just one direction.

Look at this picture. Just go to bambu studio, load the model into the slicer and click the model on so it is marked, then click on "scale". Now untick the box "uniform scale", now scale the x direction to your desired measurement. This way your batterys will fit like a glove :-). Just let me know if you need further help!

thank you, I will do that!!

thank you kindly

Happy to see your successfull print! Regarding the little residue of support on the top face, i scraped it off with a sharp cutter knife, you can also use a razor blade to get ridd of it.

thank you kindly

thank you kindly

thank you kindly

Büdde 😊

Can you show a picture of your batterys?

Here they are:

They look rewrapped, at least two of them are. I use this slide by myself and check every model before uploading it. It works perfectly fine with my original ones. I use LG HG2, Sony VTC6/VTC5, Samsung 30Q/30E etc. and have no problems whatsoever. Are your batterys protected? This model works only for unprotected ones as they are smaller in length. The only thing to solve your issue is to scale it up a little.

thank you kindly