Remix of sorts, added text and did the figuring how to get it flush. To be used in conjunction with the following stand:

https://makerworld.com/en/models/35680#profileId-53543

If you need to edit the text it's relatively easy.

1. View the plate from underneath
2. Select the object and the text_shape for the card you want to change
3. Edit text (NOTE: once you delete or modify the text it will kick you out to the filament selection for that object for some reason - ie. you delete the 8 from $80 and try to type 1 it will change the text to slot 1 AMS. It's a weird bug, just click on the text field again)
4. Click Move [M]
5. Set Z to 0 mm, Y to 0.2 mm for 40 point font and X will vary depending on the size of the numbers, not a perfect game but have to eyeball it. For 20 point (multi item cards) Y to 1.6 mm

I inserted a stop after layer 2 if you want them fairly thin, can continue after layer 2 for a little more rigidity. I turned off ironing as per the original, don't think it's needed for the backs of these.

Original idea from https://makerworld.com/en/models/50853#profileId-52652