Snips/Pliers Hook for HSW Honeycomb Storage Wall
Remixed by
Copyright Claim
Snips/Pliers Hook for HSW Honeycomb Storage Wall
Remixed by
Boost
52
163
36
GIF
GIF
Print Profile(2)
0.2mm layer, 3 walls, 15% infill
Designer
19 min
1 plate
0.2mm layer, 3 walls, 25% infill
25 min
1 plate
Boost
52
163
36
0
325
202
Released
Description
I do not like any of the HSW hangars and hooks with screw mounting, so I modified Argo's model with the standard hex insert on the back.
You'll need a little bit of support under the hex but it's a super easy print. Prints well with either a 0.4mm and 0.6mm nozzle.
Comment & Rating (36)
All
Easy print, worked flawlessly. Minimal amount of support filament on print as well. Would recommend! Thanks!
1
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
nice one. work a treat
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Printed fine but could have done with more of a heads up that I also had to print some empty honeycomb hex connectors to connect it to.
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Print quality was perfect, just didn't measure first before printing 😅
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
(Edited)
1
Reply
Print Profile
0.2mm layer, 3 walls, 25% infill
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
works great
1
Reply
Print Profile
0.2mm layer, 3 walls, 25% infill
nice :-)
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
1
Reply
Related Models
© 2024 MakerWorld