Remix of this amazing storage box for your DnD miniature!
I always use magnets in the bottom of my mini bases so that means we also need a magnet in the storage container!
I also made 2 shells with a dagger in the doorway for 2 rogues that are in my party, they look pretty cool so might aswell share them!
If you want to print them, put them into bambu lab, select the model then press the Split to parts button at the top.
Sizes
This model comes in multiple sizes, check the Raw Model Files to gather the files you need for your miniature.
Assembly
Glue the inner bottom (the one without a magic circle and with the magnet hole) to the inner shell (the one with the knob). These two parts are a tight fit, You need to clean out the ‘Base Part 2 magnet hole’ model with a knife or deburring tool! so the inner shell fits without breaking. If you dont do this the teeth have a high chance of breaking! like you can see on the picture with the middle vault.
The original file used inserts to keep your model down, they are included but not needed, if you print the ‘29mm Base Part 2 magnet hole’ file you can put in a 10mmx2mm magnet for your magnetized miniatures!
Print the inner shell with the knob on the base plate and use supports, sand the area where you removed the supports. Dry fit the parts together and in case of to much friction while opening\closing the vault sand where you feel the friction.
When ready for glueing; Insert the inner shell into the outer shell then glue the outer bottom (the one with the magic circle) to the outer shell. Don't use too much glue and once assembled keep turning the knob for a couple mins. otherwise you could glue the whole contraption together