AMS wall mount additional shelf system
Copyright Claim
AMS wall mount additional shelf system
Boost
15
24
6
Print Profile(1)
0.16mm layer, 4 walls, 25% infill
Designer
4.7 h
2 plates
Boost
15
24
6
0
37
20
Released
Description
As an extension to my AMS wall mount, I have designed a small shelving system. Four 60x120mm drawers can be used to store spare parts, for example.
Two additional triangular rods are simply inserted into the wall mount at the following position and secured with the fastening clips.
The drawers rest on the front bar and are supported by the rear bar.
Comment & Rating (6)
All
Print Profile
0.16mm layer, 4 walls, 25% infill
Top! Ich habe auf die hintere Fläche jedoch noch ganz leicht mit der Heißklebepistole drüber gewischt. damit heben die Boxen nun perfekt und verrutschen nicht mehr so leicht!
The designer has replied
0
Reply
Danke. Ich will noch am hinteren Ende der Stützplatte einen kleinen Steg anbauen dann wird das herrausrutschen auch verhindert. Das Druckprofil stelle ich ein sobald ich es ausprobiert habe.
0
Reply
Print Profile
0.16mm layer, 4 walls, 25% infill
0
Reply
Update 13.05.24: The boxes now have a small bar at the rear edge of the retaining plate. This prevents them from slipping forwards so easily.
0
Reply
Print Profile
0.16mm layer, 4 walls, 25% infill
0
Reply
Print Profile
0.16mm layer, 4 walls, 25% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld