CRACK CUBE LAMP by valerio.tarabella

valerio.tarabella

Household>Decor

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 3 walls, 25% infill

Designer

6.7 h

2 plates

4.9(14)

0.2mm layer, 3 walls, 25% infill

6.3 h

2 plates

Boost

311

467

354

215

Released

Description

EDIT: Seeing the success and the various positive feedback for this object, I decided to share the source files to allow anyone to make their own modifications and customizations, they are loaded in the RAW section together with the STL files, now there are the STEP files

Creack Cube Lamp size 10cx10x10cm.

I use a cheap cob led with wifi remote. but is possible use any type of light i design a cover base to eventually use to fix other type of light.

istructions:

Comment & Rating (28)

@flashtu1980

Print Profile

0.2mm layer, 3 walls, 25% infill

the hole in the bottom really needs some supports.

The designer has replied

@valerio.tarabel

right i check the plate as soon as possible i add support.

@Regarnogal

Print Profile

0.2mm layer, 3 walls, 25% infill

looks amazing! thanks for sharing! only thing may be to print the outer big part with supports next time cause the hole in the middle was a bit of a mess without supports. but works for me 👍🏻

The designer has replied

@valerio.tarabel

fantastic color, I will probably do it this way too, I was studying the integration of a slot for a digispark chip to be able to control the RGB LEDs with FastLED or Adafruit. As soon as I'm finished I'll post the variant of the cap with the housing of the components. For the moment I have decided to share the source files of the project to allow everyone to customize any piece without too much difficulty

@DrHobbs

Boosted

Print Profile

0.2mm layer, 3 walls, 25% infill

leider braucht das loch zum verschrauben supports, die nicht dabei waren - sonst alles top!

(Edited)

@davidz453

Print Profile

0.2mm layer, 3 walls, 25% infill

came out great with clear pla and an rgb led.

@davidz453

printed great! I made it with clear pla and put an rgb led strip inside!

@s.toni

I love it You can watch in my profile and download some cool things I will happy about it thanks

@s.toni

😊

@llcmhdesigns

can u use the led bambu lamp 001

The designer has replied

@valerio.tarabel

Sure i can add a bottom plate with support for bambulab lamp give me some time to make it. i add in this week

@Mangolicious

Cool lamp. I stole the idea and made my own, but marked is as remix of yours.

The designer has replied

@valerio.tarabel

👍 I shared the step files for this reason, to allow anyone to create their own customization

@Majobaga

Very cool design! I printed it and want to set it up with the LED inside. Can you post or link that LED disk you're using that fits with the design? I would love to order that same one if possible or something similar. All I have found on Amazon are LED strips that I would have to fit in a different way. Thanks!

The designer has replied

@valerio.tarabel

Hi, i'm happy you like the design i used this disk: https://it.aliexpress.com/item/1005005699743761.html?spm=a2g0o.order_list.order_list_main.41.3e043696O2lRU1&gatewayAdapt=glo2ita today or tomorrow i add some under cover with other type of adaptor to fit more light.

@DaddyPop

What Filament did you use?

The designer has replied

@valerio.tarabel

Purple traslucent Petg for the internal cube, and black matte PLA for external part. In the photos that i post i used White PLA for external part, but only i painted metallic black. In the photos I posted I used White PLA for the external part because I have a lot of it and the idea was to then paint it metallic black like the finish on a car. I still have to finish it. Then it depends on what finish and effect you want to create with white PLA, the light still shines through a little, I liked a clear break but even with white it's not bad.