Law Tatoo Lamp (One Piece) by Patte Santos

Patte Santos

Household>Decor

GIF

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 3 walls, 10% infill

Designer

12.7 h

4 plates

Boost

Released

Description

A lamp with one of Law's tattoos from the One Piece series
Assembled Dimensions are LxWxH: 230x60x267 mm

First, I glued the parts of the face with the teeth together on the front panel. It was very easy thanks to the slotted holes with matching counterparts. I used simple superglue for this. Then I glued the front panel into the body with the same glue. Then I pressed the body into the stand, no glue is needed here. Then I glued an LED strip into the body with the self-adhesive strip, see picture 6. Finally, just screw in the back panel and you're done!

Have fun printing and share your makes!

Edit 1: Here is the link to the LED strip I used: https://www.obi.de/led-streifen/briloner-led-streifen-flexband-3-m-selbstklebend-mehrfarbig/p/6541601

Comment & Rating (2)

@curbob

this turned out great. I lined the inside with 5v led strip and cut it to size but I think if I do another one, I’d leave the extra LEDs and figure out a way to brighten the middle area or maybe a 12v strip will work better. this has nothing to do with the print, just some fyi for those adding LEDs