Fully printable RC ATS 59G 1:10

Video : https://www.instagram.com/p/C2dS8ZzLY_k/

Thank you for buying the model, you will support my future work ☺

The ATS-59G is a Soviet armored recovery vehicle that was developed in the 1950s. years of the 20th century. It is a variant of the ATS-59, which was originally designed to tow heavy guns and carry cargo. The ATS-59G was modified for the purpose of technical rescue and recovery vehicle.
The basic technical specifications of the ATS-59G include:

Engine: The ATS-59G was equipped with a powerful diesel engine that allowed it to move over difficult terrain and haul loads.
Armoured structure: the vehicle had a solid armoured structure that provided protection for the crew against missile and explosive attacks.
Hydraulic recovery device: the most significant part of the ATS-59G's equipment was its recovery device, which enabled lifting, pulling and handling of heavy objects, including damaged vehicles or heavy obstacles.
Spare parts carrier: the vehicle often carried spare parts, tools and other equipment that were needed during technical interventions, repairs or salvage operations.
Tyres and chassis: The ATS-59G had rugged tires and a chassis that allowed it to move over a variety of terrain, including heavy muddy conditions or snowy terrain.

Crew: The vehicle had a crew capacity that included the driver and others
the technical staff needed to operate and maintain the vehicle.

The ATS-59G was used mainly in the Soviet Union and other countries
Warsaw Pact. His ability to extricate and move heavy objects was highly valued during technical interventions on and off the battlefield.

Model Specifications:
Length: 620mm
Width: 290mm
Height: 260mm
Weight of the model approx. 6 kg( with electronics installed)
The kit contains 580 parts (168 pieces of track articles)

Printing specifications:
Recommended Filament (Approx. 4.5KG)
Bodywork, Wheels, Pulleys : PET-G
Shafts: PET-G, PET-G CF-JET, PC-blend
Wheel hoops: Fiberflex 30D

Printer settings:

Nozzle diameter : 0,4mm
Layer height: 0.20mm
Number of perimeters: (3)
Supports: YES Custom (set supports according to what your printer can handle)
•
Temperatures: according to your tested printer settings for the filament.
Filling: 50-90%