如果你有BambuLab P/X/A1打印机，请使用3mf文件，你不需要更改任何设置，可以直接打印

如果你想使用其他品牌打印机，请下载STL文件，但其原始尺寸为300mm长，你需要调整X轴长度以适配热床。另外，请将顶面朝下以减少支撑用量

注意！A1 mini太小了，打印出来可能放不了什么东西（你也可以试试看^_^）

If you have a BambuLab P/X/A1 printer, please use the 3mf file. You do not need to make any changes to the settings and can print directly.

If you want to use a printer from another brand, please download the STL file, which has an original size of 300mm in length. You will need to adjust the X-axis length to fit the heated bed. Additionally, please orient the top face downwards to reduce the amount of support material used.

Note! The A1 mini is too small and may not be able to hold much when printed (you can still try it out ^_^).