ams lite dry box(干燥箱支架套件) by HeyHua

HeyHua

3D Printer>3D Printer Accessories

GIF

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 20% infill

Designer

16.5 h

5 plates

4.3(6)

Boost

Released

Description

The drying box scheme retains the original ams rewind function.|干燥箱方案保留原ams lite回卷功能.

This model uses a 26L sealed box.|此模型使用的是26L密封箱

Outside:L450mm*W308mm*H248mm|外尺寸:长450mm*宽308mm*高248mm

inside:L418mm*W278mm*H225mm|内尺寸:长418mm*宽278mm*高225mm

Can be purchased according to the actual size, and the suggested internal size range:L400m*W27mm*H22mm more than.|(可根据实际尺寸选购,建议内尺寸范围:长400m*宽27mm*高22mm以上)

Other accessories其他配件:

M4*8*8 x6

气动插头 PC-M6/4M x4

Comment & Rating (14)

@lore3d

Boosted

Print Profile

0.2mm layer, 2 walls, 20% infill

Good idea. from today I am not afraid of humidity.

(Edited)

@laser_mike

Print Profile

0.2mm layer, 2 walls, 20% infill

I had to remove some material from the spool mounting posts because fhe spool adapter was too tight. the dovetail joiner trapezoid shape also a little too large and had to trim without using a de-burring tool. filament dry box works well using the 4 boxes filled with fresh desiccant have 25-33% humidity levels inside the box. I also added a small electric heater and fan inside the box to maintain warm climate which seems to help the humidity value to level off faster when I have to open it.

(Edited)

@trickyhi

Print Profile

0.2mm layer, 2 walls, 20% infill

@user_65763675

湿度计旁边的是用来干燥的设备吗

The designer has replied

@kevoncheung

放干燥剂的

@lore3d

Boosted

Very Good Solution

@brianyang315

rfid還能使用嗎

The designer has replied

@kevoncheung

没有整合线圈，rfid不能使用

@Felix618

请问进料件如何固定？

The designer has replied

@kevoncheung

可以使用或查考其他设计师的模型 A1 Mini AMS LITE Simplify on the Z-axis 来自 grwang41 - MakerWorld https://makerworld.com/zh/models/84756#profileId-90595 或 A1 AMS + IKEA Samla Drying Box Solution 来自 Nunu1215 - MakerWorld https://makerworld.com/zh/models/79177#profileId-83597

@user_2288015658

可以分享一下干燥盒和温度计盒吗

@xinwei9936

Print Profile

0.2mm layer, 2 walls, 20% infill

@Onestis

Print Profile

0.2mm layer, 2 walls, 20% infill

Other Issues:Very poor result. walks made a mess on plate and spool holder don’t rewind once on holders. you need to keep it half way to make it work. just a waste of filament