Surprise Cat bookmark
Surprise Cat bookmark
Print Profile(1)
Description
Surprised cat bookmark. This is a silly way to have fun with your books and bookmarks.
The bookmark part is relatively thin at .48 mm so it is plenty flexible.
Even better, this is only 3 total grams of filament and 2 colors so you can do it with or without an AMS system.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm for the best results.
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Black Transmission Distance: 0.3
PLA BambuLab Basic Black Transmission Distance: 0.3
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic White Transmission Distance: 6
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Black
At layer #12 (1.04mm) swap to Black
WARNING: This Slider is at the same Layer as the Next Slider
At layer #14 (1.2mm) swap to Black
At layer #14 (1.2mm) swap to White for the rest.
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
