This is various Dust Shoe Designs for the Shiny CNC

Original Design here: ShinyCNC - Ball Screw & Aluminium Upgrade for the TinyCNC by boothyboothy | Download free STL model | Printables.com

Step files only, these are very specific to my Shiny CNC design but some folks may find the files useful for adaptation.

The hose adapter is designed for this Karcher Vacuum : Kärcher 16281030 Wet & Dry Vacuum Cleaner WD 3, blower function, power: 1000W, plastic container: 17L, suction hose: 2m, incl. cartridge filter, floor and crevice nozzle, Yellow : Amazon.co.uk: Home & Kitchen

Short test video here: Testing a Dust Shoe Upgrade for the Shiny CNC (youtube.com)

1. The clear acrylic top plate is 3mm thick cast acrylic milled on my machine.
2. The Apron was created from a 1mm thick PVC table top protector similar to this example, using the uploaded flat pattern jig for trimming: Oterri Clear Desk Mat, Non-Slip PVC Clear Desk Protector Mat with Round Edge, Heat Resistant & Waterproof Clear Desk Pad Desk Table Protector for Home and Office (Transparent, 70 x 30 cm) : Amazon.co.uk: Stationery & Office Supplies

Printed in Yellow Hatchbox ABS.

Integrated supports\bridging helpers are included within the main assembly step file.

Update: 14_02_24

1. Uploaded a revised Assembly 1 file with revisions to the Karcher Hose Clip Detail
2. Uploaded an alternative design with an intermediate hose for easier detachment of the Karcher main hose.

Update: 18_02_24

Uploaded an additional design with reduced shoe size and greater clearance to the left side of the duct. Dust Shoe Assembly3 V1.step

Update: 21_02_24

Uploaded a further design with a detachable shoe for quick changing of Apron\skirt heights. Dust Shoe Assembly4 V1.step.