Dr Who - IMC Servo Robot (printed)

Name: Dr Who - IMC Servo Robot (printed)
SKU: DT-PR-IMC Servo Robot
Price: 9.99 GBP
Availability: InStock

SKU

DT-PR-IMC Servo Robot

Skip to the end of the images gallery

Skip to the beginning of the images gallery

As low as £9.99

In stock

Only %1 left

The IMC (interplanetary Mining corporation) mk3 servo robot (also called Charlie in one scene). It's from the Pertwee serial colony in space. There are are alternative arms for the 1/12 and 1/21 versions. There are two versions of the 28mm version. The robot has monster hands for some scenes.

Categories: , , , , , ,

Details

Old Doctor Who - IMC Servo Robot - 3D Printed Model

The IMC robot was a Mark Three servo robot used by the Interplanetary Mining Corporation to survey planets for mineral deposits. It was built like a small tank with two arms and a whirring sensor on top and was operated by remote control. However, the IMC could operate it as a killing machine if their goals were threatened. The robot on IMC's expedition to Uxarieus was used by Morgan to make it appear that giant lizards were attacking the colonists. He outfitted the robot's arms with fake lizard claws and used it to kill Eric and Jane Leeson. The robot nearly killed the Third Doctor as well, but he used the remote to deactivate it

This is a model of a robot that appears in the John Pertwee era from a story called 'Colony in Space'.

There are are alternative arms for the 1/12 and 1/21 versions. There are two versions of the 28mm version. The robot has monster hands for some scenes.

This 3D design fits with other Doctor Who miniatures and display models.

This is a single-part model.

This is a Multi-part model.

The 3D printed Doctor Who model measures approx.:

175mm x 79mm x 129mm @ 1/12 Studio Scale
105mm x 48mm x 78mm @ 1/21 Scale
42mm x 19mm x 31mm @ 28mm Scale

This Sci-fi Gaming Model is printed on FDM 3D printers in our workshop. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results.

Some Clean-up May be required.

Models are supplied un-painted.

This Old series Doctor Who Display Model is printed on Resin 3D printers, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required.
Clean Resin with warm soapy water before painting for best reults.

This Sci-fi Gaming Model is printed on FDM 3D printers at some scales. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results.

This Gaming Model is printed on Resin 3D printers at some scales, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required.
Clean Resin with warm soapy water before painting for best reults.

This Dr-Who 3D model is designed for 28mm Sci-fi tabletop gaming and take an approximate base scale of 1/50.

Other scales are available and if you don't see the scale you require please contact us with details.

Please allow 5-10 days for the model to produce, this time depends on the scale of the model, the size of the order and the current workload. While we ask you to allow this time we will attempt to get the order out within a couple of days.

This 3D Doctor Who Classic memorabilia model is designed for display

Judge Dredd, Necromunda, Fallout Wasteland warfare, Warmachine/Hordes, Warsurge, Infinity, Konflikt ‘47, Kill Team, stargrave, WH40k and Star Wars Legion. It also adds flavour to RPG’s such as SLA Industries and Paranoia!

Fivecore, Marvel crisis protocol, Spectre, Black ops, Clash on the fringe, No end in sight, Battle Space, Modern ops, Dogs of War, Conflict 2000, Charlie Company, and MERCS