Mood Lamp
This object has been checked for printability, but did not pass the test and was deemed not printable. This object is still shareable and people with this link will be able to see and download the object, so please make sure you watch out and progress with care!
×Mood Lamp
Here is my design for a mood lamp for the #ElectromakerKitsCompetition.
Attached are the my version of the Stem and Shade of electro-maker's mood lamp.
Both pieces can be printed without the use of any supports for easy printing. It can also be printed without the use of brims. (you can add brims if you really want to)
To build the mood lamp, you will need everything that is provided by the online kit except for the shade and stem as I have made a new version of it.
Build the mood lamp exactly this video does it and replace their shade and stem with my version of the shade and stem.
https://www.youtube.com/watch?v=l-0cjAWTgIA&feature=emb_logo
Enjoy!
Shade: Nothing special. The thickness of the shade is 2.5-3mm so you can use whatever layer height. I recommend that you print the shade upside-down for easiest printing.
Stem: 0% infill so that its empty, 0mm for the bottom and top thickness so that it could be a hole, and have the wall thickness at least 2mm for optimal strength.
Status | Rejected |