Study board with shapes for kids.

For easier studying try to print it with more colors.

Printing tips

• Infill: use as little as possible for the board (I used 10%) to keep the board light.
• Bending: use glue stick or spray to keep your print hold on the plate.
• Size: should print fine even at 50% due to added spacing.
• Shapes: if you want to have both sides smooth you can try ironing.
• Versions: there are two version of the board included
  • hollow full = you will for sure need supports to print this. I printed it upside down and had “fun” removing the supports but it looked a lot better.
  • hollow partial = you can print it without supports. I strongly recommend using glue stick or glue spray to keep it on the plate while printing.