Overview

This is a wall mounted counter sign that uses customizable sign plates. The signs can be made with the MakerLab make my sign app. You can use some that I have uploaded or make your own - instructions for sizing are below.

Unfortunately at this time this is not printable on the A1 Mini. I might make a scaled down version in the future.

The sign features a face plate that holds two dials which can be turned from the left or right. Springs on both dials make turning snappy and keep the display indexed on a number.

There are 3 hang points at the top.

Once Printed, snap pegs, springs, and respective dials into position.

Parts Printing

Print each plate of the included print profile, or print parts as below.

1x of each dial. Apply a color change at height for the numbers, and I recommend fuzzy skin on the lower part of the dial so it is a little more grippy when turning.

Face 1x - make sure and print with no supports.

springs 2x. PLA is fine. PETG is good too but will be a little less stiff.

Pegs 4x

I put the small parts (springs and pegs) onto their own plate. You could print together with the bigger parts, but I wanted the pegs for mine to be white to match the sign backgrounds.

Make Your Own Signs

This counter uses an upper and lower sign, make each as indicated.

If you have a good idea for sign plates for use with this counter, Upload your signs as a remix to this file so other people can easily find them!

Parameters:

• Dimensions
  • Upper sign size: 200x50mm
  • Upper sign size: 200x100mm
• Keep default base plate thickness of 1mm
• Select double holes on top
  • Hole size 5mm
• Important! Do not change default corner radius.
  • Corner radius changes the hole distance from the edge, so if this is anything other than 10mm, you sign holes will not line up with the pegs on the counter board.

Existing Signs

I will update this to add signs as either print profiles or remixes.

Powered by Make My Sign from MakerWorld(makerworld.com/makerlab/MakeMySign) :)

Powered by Make My Sign from MakerWorld(makerworld.com/makerlab/MakeMySign) :)