This is a temp sensor mount I created for the Chip version of the DS18B20 I have tested it in ABS, and it is designed to be pushed together, so no screws are required. I have included a picture of the sensor I bought.
You will however need to glue in 2 magnets 6 mm Diameter by 3 mm to hold is to the front chassis.
This is designed to work solely with the P1 Touch, X Touch system.
I have also created the following mounting frame, which includes a reset button.
XTouch Screen Mount by Aussie 3D Makers - MakerWorld
If you would like more info on the project, the GitHub for the XTouch is here GitHub - xperiments-in/xtouch
If you like our models and want to contribute to our future work feel free to Buy us a Coffee :) https://www.buymeacoffee.com/aussie3dmakers