Bambu Lab Original Filament Swatch Sample Text Remixed by platini76

Remixed by

platini76

Tools>Organizers

Print Profile(5)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

Embedded Text - 0.4mm nozzle 0.12mm layer 2walls 100% infill

Designer

18 min

1 plate

4.8(10)

Raised text - 0.4mm nozzle - 0.12mm layer, 2 walls, 100% infill

Designer

16 min

1 plate

4.7(21)

A1 Mini - 0.4mm nozzle - 0.2mm layer, 2 walls, 100% infill

Designer

18 min

1 plate

Embedded Text - 0.2mm nozzle, 0.1mm layer, 4 walls, 100% infill

Designer

50 min

1 plate

5.0(1)

Click to see more

Boost

117

272

731

Released

Description

Texted Bambu Lab Original Filament Swatches with Text Improvement with new profile

please BOOST my models if you like them!

For My New Filament Board 5x4 with Labels Print Here

Don't forget to print my filament swatch holder for spools cartons and Dry Box here

and my Cereal dry box spool here

If you download or print my models. PLEASE rate it! You will help me.

to edit text please follow:

to get the same position every time you change text you have to select it and position button. it must be 0 where undelined in picture

if you like please help me funds my design and filaments for prototypes PLEASE Consider To Download this model and boost it, IT IS COSTLESS FOR YOU and SUPPORT my work.

thank you

Comment & Rating (73)

@Gigagamesguy

ich musste 2 neu machen die beiden rechten waren nicht so toll, die 3 links waren ok. Bambu A1Mini 0.4 Nozzle Sunlu Highspeed PLA

The designer has replied

@platini76

can happens with 0.4 mm nozzle. I suggest to print 2 or use 0.2mm nozzle profile and you will have fantastic prints..!

@Gigagamesguy

I dont have a 0.2 nozzle, its for me ok, I am learning

@ozskeeter

Print Profile

Embedded Text - 0.4mm nozzle 0.12mm layer 2walls 100% infill

thank you

The designer has replied

@platini76

thanks for your precious feedback! please boost one of my models @platini76 it is helpful for me

@JJDeluxeDesigns

Print Profile

Raised text - 0.4mm nozzle - 0.12mm layer, 2 walls, 100% infill

fits and prints perfect

The designer has replied

@platini76

I am so happy! thanks! it's a nice solution to print as you only in one color...I like it! you can also try my model with labels for swatch board https://makerworld.com/en/models/148031#profileId-161503

(Edited)

@ads676767

Print Profile

Embedded Text - 0.2mm nozzle, 0.1mm layer, 4 walls, 100% infill

The designer has replied

@platini76

thank you for your feedback it is much appreciated! please boost my models it will help me and it is cost less for you!

@dtr4in

Print Profile

Raised text - 0.4mm nozzle - 0.12mm layer, 2 walls, 100% infill

Text was not editable, and when printed it was almost unreadable. ended up printing with no text. Size is perfect and it fits the swatch plates that are around - same size as the BL ones.

(Edited)

The designer has replied

@platini76

sorry, you are in mistake, please change your feedback and description. text is editable you have just to go to this section: photo attached. for non readable text after printing.. you had to check your printer settings... as my photos are real and you can see that text is well printed.... for better result you have to print with 0.2mm nozzle and use the profile uploaded

(Edited)

@dtr4in

Replying to @platini76 :

Not sure what happened the first time, but I downloaded it again and I was able to edit the text - the rating was modified to a 5 :)

@platini76

Replying to @dtr4in :

I am happy! well done! check my other models please!

(Edited)

@Gmoney316

cant change color of text I change it to back but shoes up yellow

The designer has replied

@platini76

hello, yellow means that text is embedded, if you go on slice and then print you can choose color of text

@Gmoney316

ok ill give it a try

@cosaryu

prints great! how did you get it so when you edit the text it stays in place also? every time I try to edit text on a different model it moves

The designer has replied

@platini76

I have add in description instruction to align text every time on the same place.

@phoenix_ch

Print Profile

Raised text - 0.4mm nozzle - 0.12mm layer, 2 walls, 100% infill

Perfect for own swatches

The designer has replied

@platini76

thanks for your precious feedback! please boost one of my models @platini76 it is helpful for me

@michel_prints

Print Profile

Embedded Text - 0.4mm nozzle 0.12mm layer 2walls 100% infill

Fits perfectly, thanks!

The designer has replied

@platini76

thanks for your precious feedback! please boost one of my models @platini76 it is helpful for me

@Rouxibeau

Can you explain how you derive the 4 digit number that you've chosen in each swatch?

The designer has replied

@platini76

it's my private classification a number starting from 0001 and so on..., but you can write something that you want... code, lot, name...

This remix is based on

Swatch Sample

Zhanchi Wang

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Filament Transparency Swatch

Henlor

Suspended Filament Vortex -Original

RJ Design

224

510

Sample Box Filament Flow rate

Lucky3310

Bambu Lab PLA / Filamentopedia Swatch

FattyMoBookyButt