Reusable Spools for Bambulab A1 Mini compatible with AMS Lite
Copyright Claim
Reusable Spools for Bambulab A1 Mini compatible with AMS Lite
Boost
45
78
24
Print Profile(2)
0.3mm layer, 2 walls, 15% infill
Designer
5.4 h
2 plates
0.8mm nozzle, 0.32mm layer, 2 walls, 15% infill
3.6 h
2 plates
Boost
45
78
24
0
166
187
Released
Description
Spool compatible with Bambulab refill filament and AMS Lite system. Printable using an A1 mini.
Overhangs in the model have been fixed on this version, no need for support.
To use them, quite simply just screw the two halves together with a Bambulab refill spool in between. It will be a bit of tight fit but it will not come loose.
Comment & Rating (24)
All
Print Profile
0.3mm layer, 2 walls, 15% infill
Perfect Print!
1
Reply
Print Profile
0.3mm layer, 2 walls, 15% infill
50 percent speed for the few initial layers will be better
0
Reply
This was a perfect fit for my Bambu PLA Basic - Thank you
0
Reply
Print Profile
0.3mm layer, 2 walls, 15% infill
a very good print, no supports needed
0
Reply
Print Profile
0.3mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.3mm layer, 2 walls, 15% infill
needs support
The designer has replied
1
Reply
I will update the model, thanks for letting me know!
0
Reply
Just uploaded a new version with removed overhangs, let me know if you have the same issue.
0
Reply
is the torque from the threads enough to hold the spool together or is there a locking system like on the bambu spool print?
The designer has replied
1
Reply
the fit is well tight, both on threads and spool. there is no chance it will come off.
0
Reply
Print Profile
0.3mm layer, 2 walls, 15% infill
Didn't look closely for width, 1Kg barely fit on it.
The designer has replied
0
Reply
I'll crate a wider second version if you let me know how much wider you need it
0
Reply
Print Profile
0.3mm layer, 2 walls, 15% infill
Easy to print and to assemble, thank you.
0
Reply
Print Profile
0.3mm layer, 2 walls, 15% infill
Very good design, I now have nearly ten of these printed, all flawless
0
Reply
License
This work is licensed under a
Creative Commons AttributionRelated Models
© 2024 MakerWorld