Interchangeable Filament Clips with Numbered Holder by Misfitwrx

Misfitwrx

3D Printer>3D Printer Accessories

Print Profile(1)

All

0.2mm layer, 2 walls, 15% infill (KEEP SCALE AT 102% for the Clip Base and Tags)

Designer

8.2 h

5 plates

5.0(2)

Boost

Released

Description

Here are some filament clips with interchangeable tags so you can display the material type on the clip.

They are interchangeable, which allows you to print a large quantity of “base” clips and then print the specific tags as needed.

I also needed a place to store the clips when the filament is in the AMS units, so I created a holder that can be mounted to the AMS unit (or on the front of the A1 printer as shown in the picture.

The holder is numbered in increments of 4 up to 16 so if you have 4 AMS units on a P1 or X1 they can match the corresponding filament number on the device and in studio.

*NOTE, the clip base and tags are currently set to 102% scale. this is where it should be left for best fit with the filament.

The second plate is loaded with 4 PLA tags, if you need different ones you can clone them from plate 04 and drag them over.

you can also quickly change the text color by clicking on the tag and changing the text shape color in the objects browser.

Comment & Rating (2)

@user_1125508599

Print Profile

0.2mm layer, 2 walls, 15% infill (KEEP SCALE AT 102% for the Clip Base and Tags)

ein top Ergebnis

@MikeDrop

Print Profile

0.2mm layer, 2 walls, 15% infill (KEEP SCALE AT 102% for the Clip Base and Tags)

No more

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.