Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Protopasta Soda Green Transmission Distance: 16
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Soda Green
At layer #13 (1.12mm) swap to Silver
At layer #15 (1.28mm) swap to Marine Blue
At layer #20 (1.68mm) swap to Jade White for the rest.