Fallout hueforge
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA Kexcelled Lake Blue Transmission Distance: 3.6
PETG JAYO Gray Transmission Distance: 2.5
PLA BambuLab Basic Yellow Transmission Distance: 6
PETG GEETECH Gray Transmission Distance: 3
PETG JAYO White Transmission Distance: 6
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #3 (0.32mm) swap to Lake Blue
At layer #7 (0.64mm) swap to Gray
At layer #10 (0.88mm) swap to Yellow
At layer #16 (1.36mm) swap to Gray
At layer #17 (1.44mm) swap to White for the rest.