The ST-AR15 Rail For CYMA Gel-Blaster

Attention:

!!! RISK IN YOURS !!!

!!! 注意你的風險 !!!

Gel-blaster "seems" ban in some countries from 2019. I hope your country can still play wargame sport.

As our workshop has ceased operations, we have decided to share some of our digital assets with the open-source community after consulting with our internal members.

Summary:
The project contains two versions （13.5inch & 15inch）. The 13.5inch version is better for wargame sports use, and the 15inch version is better for cosplay.

Update 2023/12/21: Addon STEP files.

Hardware List:
(1 piece) Aluminum pin M3 x 12MM
(2 pieces) Aluminum pin M4 x 16MM
(1 piece) WORKER Pipe 35CM（Cut according to your needs. The 15inch version requires a Pipe longer than 40cm, so I recommend purchasing a hard PC tube with an 19CM（OD） and thickness 1MM（Thickness））
(1 piece) Aluminum hollow pipe for Gel-Blaster（least 40cm or above）
(4 pieces) Hexagon nut M4
(1 piece) Hexagon nut M3
(1 piece) Setscrew with hollow head M3 x 4MM
(2 pieces) machine screw with hollow flat head M4 x 8MM
(2 pieces) machine screw with hollow flat head M4 x 10MM
(1 roll) EVA Single-Sided Adhesive Black Foam Tape 20MM（Wide）x 1MM（Thick） (Cut out 2 pieces, the approximate size of 30MM x 11.5MM)
(Several pieces) Silicone gasket 30MM（OD） and 26MM（ID）

Assembly Guide Video:（These videos are just explained by Chinese Language）
https://mega.nz/folder/NTNyTTKQ#Jv3RPJjEWcOj3tW7L4tsUA

Printing Summary:
These models are not all suitable for FDM printing.

Suitable for FDM Parts Include:
"Gel-Blaster tube support- 9.5mm to 17mm"
"Gel-Blaster tube support- For cyma"
"GIRLS’FRONTLINE ST-AR15 MOD-1 ST-AR15_Part 1(15inch)"
"GIRLS’FRONTLINE ST-AR15 MOD-1 ST-AR15_Part 1(13.5inch)"

Suitable for SLA Parts Include:
"GIRLS’FRONTLINE ST-AR15 MOD-1 ST-AR15_muzzle"
"GIRLS’FRONTLINE ST-AR15 MOD-1 ST-AR15_Part 2"
"GIRLS’FRONTLINE ST-AR15 MOD-1 ST-AR15_Part 3"
"GIRLS’FRONTLINE ST-AR15 MOD-1 ST-AR15_Part 4（lock 16-18mm）. STL"
"GIRLS’FRONTLINE ST-AR15 MOD-1 ST-AR15_Part 4"

Suitable for MJF/SLA Parts Include （I recommend using MJF）:
"GIRLS’FRONTLINE ST-AR15 MOD-1 ST-AR15_15inch"
"GIRLS’FRONTLINE ST-AR15 MOD-1 ST-AR15_13.5inch"

Other:
The "GIRLS’FRONTLINE ST-AR15 MOD-1 ST-AR15_Part 5" need printing by SLS or CNC. (Or you can just use glue to secure this part, maybe not really stable) (P.S. The thread size of the part is metric M32, with a pitch of 1.5mm)