Tippi Printi - a Tippi tree ornament remix
Tippi Printi - a Tippi tree ornament remix
3D
Published 2022-12-05T16:44:40+00:00 • Remixed from Tippi Tree Ornament Tool (Tippi Tipmas Tree Contest)
Introducing the Tippi Printi, the smallest printer you've ever seen! With a whopping 24x24x24mm build volume, this printer won't leave you hanging!
To assemble the Tippi Printi, print the chibi-print and chibi-printer files in your colors of choice. First, assemble the printer by sliding the loose crossbar sideways into the slot near the top of the printer's frame. Then, snap the print into the base of the printer. The tolerances are fairly tight, so a decent amount of force may be needed (it may be good to keep the printer on a flat surface and push down to avoid snapping the frame apart). With the print and printer assembled, make sure to plug a Tippi Tree fruit stem into the top of the print so it can be hung from your tree!
I've also included the clip if you want to make your own print for the Tippi Printi. To use it, just sink the extra 1mm of the clip-positive file into a surface on your model of choice, then merge/union the file with the model. If the triangular clips are pointing away from the model, you've done it correctly! Make sure the model without the clip can fit in a 24x24x24mm cube to ensure it will fit onto the Printi's print bed. However, you can go a couple more millimeters in some directions.
Merry Christmas and Happy Holidays!
| Date published | 05/12/2022 |
| Support Free | YES |