Nespresso Space-Saving capsules dispenser stv-is-it
SEE VIDEO: https://youtu.be/ywQ7Ch9_gYc)
Each dispenser contains a full 10-capsule package.
You can put more nearby dispensers to have a wide choice of tastes (and colors).
The main element can be printed in 1 single piece (COMPLETE) or in 2 parts (FRONT, REAR) to be joined with glue.
For the single-piece version a Z-axis of at least 300 mm is required,
for the 2-part version the 150 mm Z-axis is sufficient.
Print the long parts vertically for better accuracy.Assembly instructions: Place the triangular support under the kitchen cupboards with the 2 screw holes facing you (also add the tube-dispenser to find the right depth). Mark the points to insert the screws (preferable) or if you prefer you can use good quality double-sided tape. Secure the stand. Select the inclination you prefer by inserting in the back of the tube-dispenser The element that adjusts the inclination between 20-25-30-35 degrees (in the video is used the 20 degrees).
Fill the tube-dispenser with the capsules and insert it into the support as shown in the video.
VIDEO: https://youtu.be/ywQ7Ch9_gYc
| Price | $6.90 |
| Category | Household |
| Purchases | 84 |
| Views | 5919 |
| Likes | 22 |
| Uploaded | 02/15/2018 |
This work is licensed under a Creative Commons Attribution-NoDerivs 2.5 Generic.
| ANGLE_20.stl | 129 KB |
| ANGLE_25.stl | 118 KB |
| ANGLE_30.stl | 182 KB |
| ANGLE_35.stl | 170 KB |
| z150 _FRONT.stl | 2 MB |
| z150 _REAR.stl | 2 MB |
| z300_COMPLETE.stl | 4 MB |
| SUPPORTo.stl | 580 KB |
Note: if you want to re-download a file, please do so from your Purchases page or the product page. Download links are set to expire. You might get an error if you try to re-download a file from your browser's downloads page.
Have a nice day.
can anybody tell me the best % of infill and speed for printing the different parts ?
It just for original Nespresso capsule or it can be used for vertuo ?
It also works perfectly with non-original Nespresso capsules, (but compatible).
The only problem you can have is that SOME non-original Nespresso capsules are 1-2 mm taller. In this case you can put 9 in the dispenser, but everything works perfectly.