Jennifer Elekta Movie Outfit by SPARX 3D print model

One of my followers suggestions for a model . so I added to the list and the more I thought about it the more I wanted one for my own collection . . . so here is “That Red Suit” from the 2005 movie Elektra starring Jennifer Garner . .. OK the movie was a big disappointment, the plot was (in my opinion) not fantastic . . but character and Jennifer was a hit with me . . .hopefully with my followers as well . . I have tried to keep costume and sizes true to the movie with a few adjustments to allow the model to be split and printed . .

. . . This Download is ONLY THE RED SUIT VERSION ALL PARTS ARE INCLUDED AS IN PICTURES TO CREATE A FULL MODEL AND BASE.

As previous an NSFW adult add-ons version is available to purchase separately contact me for details.

The torso’s and head parts are removable and interchangeable with magnets (see pics)

Based on JENNIFERS’s Measurements of 173cm Tall 32B–27–35

Model is 1/6th scale therefore 288mm Height flat footed. The Model therefore in heels with base = 299mm

Elektra/Jennifer 1 upper torso Pose 1 Left Arm 1 Right Arm 2 lower torso 1 right boot 1 left boot 2 Head and 1 Head pin 1 head stand 1 Base

12 items in total.

PURCHASE OF THESE FILES DOES NOT ALLOW SELLING STL FILES OR MODELS MADE FROM THE FILES. . . DOWNLOAD IS FOR SINGLE BUYER USE ONLY

I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED

All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included. These orientations work for FDM printing but you may find a better orientation that reduces support. All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.

Why cut into many smaller parts I have been asked?

1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printers So now you know! Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed. All of my models are only released when they can print! so please do not remix or fix faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.

3D PRINTING SETTINGS

It is advised to assemble in groups of parts as per assembly instructions. Resin Printing; Hollow 2.40 Raft 95% Lower Torso’s, Boots

Hollow 2.70 Raft 95% Upper Torso, Heads

DO NOT Hollow Arms

FDM Arms 80% fill 0.12 speed 40 Rest at 0.16 30% fill, speed 50

ALWAYS dry assemble and “trim” parts prior gluing. Look at the picture of how to assemble parts, so that you construct and paint upper and lower parts for both figures separate before joining. ..