3D PRINT & LASER CUT - HVAC - HEAT EXCHANGER 700 VERS. - 4MM PLEXIGLASS HOUSING

HEAT EXCHANGER 700 VERS.- 3D PRINT & LASER CUT - 4MM PLEXIGLASS HOUSING - 4 INCH HOSE CONNECTORS

Reduce your energy bill !

An Inline Hepa Filter System is now available to download:
https://cults3d.com/en/3d-model/tool/large-circular-hepa-filters-housing

220X220X220mm 3D PRINTER & 600x900mm CO2 LASER - IS STRONGLY RECOMMENDED TO HAVE ACCESS TO... BEFORE STARTING THIS JOB!

HOUSEHOLD OR INDUSTRIAL APPLICATIONS

A HEAT RECOVERY SYSTEM DUAL USE - HEAT AND COULD

THIS UNIT USE A DOUBLE THREAD DESIGN, CREATED AND OPTIMISED FOR 3D PRINTING.

USING THE AIR - AIR HEAT EXCHANGER IS ONE WAY TO RECOVER THAT LOST ENERGY DURING VENTILATION! INSTEAD OF OPEN A WINDOW AND LOOSING THE HEAT/COULD FROM YOUR HOUSE... USE A HEAT RECOVERY SYSTEM!

FOR EXCHANGER THERMAL TRANSFER MEDIA ARE USED POLYCARBONATE SHEETS - 4MM DUAL WALLS - SIZE 450X450mm.
FOR SEPARATION PLAN ARE USED STRIPS OF POLYCARBONATE SHEET - 4MM DUAL WALLS - SIZE 20X450mm.

FOR BEST RESULTS A 600X900 CO2 LASER IS REQUIRED TO CUT THE TRANSFER MEDIA MATERIALS - POLYCARBONATE, AND ALSO FOR THE FACES OF THE HEAT EXCHANGER - PLEXIGLAS.

IN ORDER TO REDUCE THE SIZE OF THE LASER UNIT, THE TOP AND BOTTOM FACES ARE DESIGN TO BE CUT (EACH) IN TWO SECTIONS.

USED FILTERS - AUTO POLLEN FILTER - BK10301
https://utb-shop.ro/Filtru-polen-Dacia-Logan-II-272773016R-BK10301/PD/4424

IT CAN ADAPT TO 120, 130 OR 140MM MOTORS.

GOOD LUCK AND HAPPY PRINTING!

This KIT is for personal use only! Please read our policy! If you do not agree, please do not buy this product! Failure to comply with our policy will result in the immediate termination of your user license! Do not alter or modify to resale, share with others, make it public or redistribute in any form, digital or in physical form, all digital content as images, dxf, stl files, etc. Do not sell, share, makes it public or redistribute as it is in current form. Do not sale the final product! You will need a Commercial License in order to sell this final Product! For a commercial license please contact us! Without a commercial license you are allowed to sell only one unit for each kit you buy!

Thank you for your interest in our product!

Stay safe, be safe and be happy!

DESIGN TO PRINT WITHOUT SUPPORT. DESIGN WAS OPTIMIZED FOR 0.4MM NOZZLE, HOWEVER, FOR FAST PROTOTYPING A 1.0MM NOZZLE CAN BE USED, IN DETRIMENT OF QUALITY!

CLEAN ALL THREADS OF ANY PRINTING GLITCHES BEFORE ASSEMBLING!