3D pin art( voxel) toy, print-in-place by TomatoKiller

TomatoKiller

Toys & Games>Other Toys & Games

GIF

Print Profile(5)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

Tighter tol@0.4mm Adaptive layer, 2 walls, 5% infill

Designer

9.1 h

1 plate

4.6(16)

Looser tol @ 0.6mm 0.2mm layer, 2 walls, 5% infill

Designer

8 h

1 plate

4.3(29)

Replacement pin 0.2mm layer, 3 walls, 8% infill

Designer

14 min

1 plate

5.0(5)

A1 mini 0.25mm layer, 2 walls, 5% infill

Designer

9.7 h

1 plate

4.5(6)

Click to see more

Boost

340

593

697

414

Released

Description

A print in place design of the 3D pin art toy, traditionally made with steel nails and wooden board. Any object underneath will push up the pins to create an impression on the top face. Very fun to handle.

The print profile consists of 171 pins, and total 85x126x40mm in size.

The large number of pins increase likelihood of some coming loose during print. Please use glue on build plate. I will also included a repair pin profile to replace badly printed pins.

There is a larger version that exceeds MakerWorld slicing time and can only be a Step file include here as raw. Please download the raw file and slice yourself.

Comment & Rating (68)

@Forest87

Print Profile

Looser tol @ 0.6mm 0.2mm layer, 2 walls, 5% infill

Nice mnice model but one cylinder didn't print well and broke immediately after removing it from the plate, another one fell off after a day of use (my fault :D). However, it is a beautiful model, very relaxing and satisfying

(Edited)

@sublime2471

I made the smaller one turned out great. I did have one pin come loose but no failure. I took an individual pin and sliced it and added a snap connector to fix it.

The designer has replied

@TomatoKiller

u are welcomed to share that individual pin as a repair profile

@IainWillis

Print Profile

Looser tol @ 0.6mm 0.2mm layer, 2 walls, 5% infill

Very nice!

@user_2503664597

Print Profile

Looser tol @ 0.6mm 0.2mm layer, 2 walls, 5% infill

Printed absolutely perfect. 4mm nozzle, All default settings with Bambu lab PLA Basic Blue. I’m going to try the big version soon.

@user_4180967735

Boosted

Print Profile

Looser tol @ 0.6mm 0.2mm layer, 2 walls, 5% infill

(Edited)

Missing Model Parts:PETG purple didn’t work. PLA grey sparkle did. one pin became unstuck, stopping the print and melting it to adjacent plastic allowed the job to resume successfully.

@user_2885977772

make this for a1 mini

The designer has replied

@TomatoKiller

Done, please check it out

@user_2885977772

Replying to @TomatoKiller :

thank u

@JarJarBinks

Print Profile

Tighter tol@0.4mm Adaptive layer, 2 walls, 5% infill

some pins didn’t print well, but there’s a replacement pin profile

(Edited)

The designer has replied

@TomatoKiller

there is a repair pin profile included here. use that to make good replacement pins

@JarJarBinks

sweet!! thanks for responding!

@maxaruta

Why did you copy it without credit? https://makerworld.com/en/models/58154#profileId-59882

The designer has replied

@TomatoKiller

first of all. I didn’t copy anyone’s design. this toy has been around for ages. I just made a design that can be printed nicely. secondly that link doesn’t work. I’m not sure what you are referring to.

@TomatoKiller

oh I just saw you had a design of the same game. called a very different name. it did not show up when I was searching prior to me designing this. One major difference is your design is a standard square grid while mine is staggered. mine also has 4 legs. different number of pins as well, that wouldn’t count as copy.