Cute customisable astronauts: Cosmic Cuties
No supports needed for the sitting cuties, but supports are required for the standing astronauts.
They are made for 16mm
marbles (see below for different sizes). The table below shows all different features that can be ‘selected’. There are 32 different possible combinations.
Each feature can either be a 1
or a 0
. If you want all options from the left column, you choose the file Cosmic Cutie 11111
. If you want all options from the right column, you choose the file Cosmic Cutie 00000
.
1 | 0 | bit |
Backpack (life support system) | No backpack | 1 |
Belly monitor (control module) | No belly monitor | 2 |
Sitting | Standing | 3 |
Waving | Arms down | 4 |
Keychain | No keychain | 5 |
Any other combinations in between are possible, for example: Cosmic Cutie 10110 will have a backpack, will be sitting and waving but he will not have a belly monitor nor a keychain hole.
Press a 16mm
marble in the head. If you had some filament drooping at the top, remove this with a knife first.
If you have a different marble size, you can scale this model up or down to fit your needs. This is the formula (where D
is the diameter of your marble in mm.
Scale = D*100/16
Enjoy printing!