Skip to content

3d Printable fj cruiser offroad RC Car

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 275 views
  • 3 likes
License
Usages
3D design format
1 file (ZIP) Close
  • DESIGN FOLDER.zip
    • CHASIS, MOTOR MOUNT AND SHOCK MOUNT/chasis 4 pcs.STL
    • CHASIS, MOTOR MOUNT AND SHOCK MOUNT/motor mount plate.STL
    • CHASIS, MOTOR MOUNT AND SHOCK MOUNT/up chasis-shock-servo mount 2 pcs.STL
    • FRONT DIFFERANTIAL/AXLE RODS/front down axle rod 2 pcs.STL
    • FRONT DIFFERANTIAL/AXLE RODS/front up axle rod 2 pcs.STL
    • FRONT DIFFERANTIAL/DIFERANTIAL/diferantial axle mount gear 2 pcs.STL
    • FRONT DIFFERANTIAL/DIFERANTIAL/diferantial internal gears 2 pcs.STL
    • FRONT DIFFERANTIAL/DIFERANTIAL/diferantial main block 2 pcs.STL
    • FRONT DIFFERANTIAL/DIFERANTIAL/diferantial mount ring.STL
    • FRONT DIFFERANTIAL/DIFERANTIAL/diferantial pinion gear.STL
    • FRONT DIFFERANTIAL/DIFERANTIAL/diferantial rack gear.STL
    • FRONT DIFFERANTIAL/front axle down part.STL
    • FRONT DIFFERANTIAL/front axle up part.STL
    • FRONT DIFFERANTIAL/front axle-wheel mount 2 pcs.STL
    • FRONT DIFFERANTIAL/front diferantial axles 2 pcs.STL
    • FRONT DIFFERANTIAL/front wheel connector 2 pcs.STL
    • FRONT DIFFERANTIAL/front wheel holder L.STL
    • FRONT DIFFERANTIAL/front wheel holder R.STL
    • FRONT DIFFERANTIAL CONNECTON RODS AND FRONT SERVO CONNECTION ROD/FRONT DIFERANTIAL CONNECTION ROD/front diferantial connection rod 1.STL
    • FRONT DIFFERANTIAL CONNECTON RODS AND FRONT SERVO CONNECTION ROD/FRONT DIFERANTIAL CONNECTION ROD/front diferantial connection rod 2.STL
    • FRONT DIFFERANTIAL CONNECTON RODS AND FRONT SERVO CONNECTION ROD/SERVO CONNECTION ROD/servo connection rod 1.STL
    • FRONT DIFFERANTIAL CONNECTON RODS AND FRONT SERVO CONNECTION ROD/SERVO CONNECTION ROD/servo connection rod 2.STL
    • GEARBOX/gearbox down block roller cap 2 pcs.STL
    • GEARBOX/gearbox down block.STL
    • GEARBOX/gearbox up main block.STL
    • GEARBOX/middle gear.STL
    • GEARBOX/motor gear.STL
    • GEARBOX/motor mount plate.STL
    • GEARBOX/outer gear-axle mount 2 pcs.STL
    • GEARBOX/outer gear.STL
    • REAR DIFFERANTIAL/12-8 hex connector for rear tire-rear axle bolt nut assembly.STL
    • REAR DIFFERANTIAL/AXLE RODS/rear down axle rod 2 pcs.STL
    • REAR DIFFERANTIAL/AXLE RODS/rear up axle rod 2 pcs.STL
    • REAR DIFFERANTIAL/DIFERANTIAL/diferantial axle mount gear 2 pcs.STL
    • REAR DIFFERANTIAL/DIFERANTIAL/diferantial internal gears 2 pcs.STL
    • REAR DIFFERANTIAL/DIFERANTIAL/diferantial main block 2 pcs.STL
    • REAR DIFFERANTIAL/DIFERANTIAL/diferantial mount ring.STL
    • REAR DIFFERANTIAL/DIFERANTIAL/diferantial pinion gear.STL
    • REAR DIFFERANTIAL/DIFERANTIAL/diferantial rack gear.STL
    • REAR DIFFERANTIAL/rear axle down part.STL
    • REAR DIFFERANTIAL/rear axle up part.STL
    • VEHICLE CUP/air intake.STL
    • VEHICLE CUP/body front mount-plate.STL
    • VEHICLE CUP/body rear mount-plate.STL
    • VEHICLE CUP/door-FL.STL
    • VEHICLE CUP/door-FR.STL
    • VEHICLE CUP/door-RL.STL
    • VEHICLE CUP/door-RR.STL
    • VEHICLE CUP/doorstep-left.STL
    • VEHICLE CUP/doorstep-right.STL
    • VEHICLE CUP/Front Logo Toyota1 FJ CRUSER.STL
    • VEHICLE CUP/front plate fix-L.STL
    • VEHICLE CUP/front plate fix-R.STL
    • VEHICLE CUP/front plate.STL
    • VEHICLE CUP/front-bumper.STL
    • VEHICLE CUP/front-lights.STL
    • VEHICLE CUP/glass trunk door.STL
    • VEHICLE CUP/hood.STL
    • VEHICLE CUP/inner locker.STL
    • VEHICLE CUP/light RL.STL
    • VEHICLE CUP/light RR.STL
    • VEHICLE CUP/mirror FL mount.STL
    • VEHICLE CUP/mirror FL.STL
    • VEHICLE CUP/mirror FR mount.STL
    • VEHICLE CUP/mirror FR.STL
    • VEHICLE CUP/outer locker.STL
    • VEHICLE CUP/quarter-RL.STL
    • VEHICLE CUP/quarter-RR.STL
    • VEHICLE CUP/Rear Logo Toyota1.STL
    • VEHICLE CUP/rear-bumper.STL
    • VEHICLE CUP/roof lines.STL
    • VEHICLE CUP/roof rack.STL
    • VEHICLE CUP/roof-back.STL
    • VEHICLE CUP/roof-center.STL
    • VEHICLE CUP/roof-front.STL
    • VEHICLE CUP/spare tire holder.STL
    • VEHICLE CUP/trunk door mount part.STL
    • VEHICLE CUP/trunk-door.STL
    • VEHICLE CUP/windshield-frame.STL
    • VEHICLE CUP/wing-FL.STL
    • VEHICLE CUP/wing-FR.STL
    • VEHICLE CUP/wing-RL.STL
    • VEHICLE CUP/wing-RR.STL
    • WHEELS, AXLES AND SHOCK ABSORBER/AXLES/front, rear axles.STL
    • WHEELS, AXLES AND SHOCK ABSORBER/SHOCK ABSORBER/absorber down part.STL
    • WHEELS, AXLES AND SHOCK ABSORBER/SHOCK ABSORBER/absorber middle part.STL
    • WHEELS, AXLES AND SHOCK ABSORBER/SHOCK ABSORBER/absorber up part.STL
    • WHEELS, AXLES AND SHOCK ABSORBER/WHEELS/front wheels 2 pcs.STL
    • WHEELS, AXLES AND SHOCK ABSORBER/WHEELS/rear wheels 2 pcs.STL

Learn more about the formats
Publication date 2024-03-02 at 18:59
Design number 1828448
punkersen

punkersen

3D printer file info

3D model description

Fully 3d Printable RC fj cruiser offroad car. Every part can be made on a 3D printer. Also you have a second option for shock absorbers, wheels and another some parts.

Model Lenght:570mm
Model Height:300mm
Model Width: 280mm

The driving parts of the vehicle are simple detailed.And easy to assemble.

Below are the parts you need for assembly.

m3x10 inbus bolt and nut 4 pcs for Body mount plate-chasis assembly.

m4x16 ınbus bolt and nut 4 pcs cup-Body mount plate assembly

m3x20 inbus bolt and nut 20 pcs axle rod-axle-gearbox body assembly

m3x12 inbus bolt 4 pcs gearbox up and down body assembly

m3x12 inbus bolt and nut 4 pcs seervo rod parts and steerin rod parts assembly

m3x25 inbus bolt 1 pcs and m3x16 inbus bolt servo and steering rod-wheel holders assembly

m3x10mm inbus bolt and fibered nut 2 pcs front axle end assembly.

m4x30mm inbus bolt and nut 2 pcs Front wheel holder-wheel connection part.

m3x12mm inbus bolt and fibered nut 4 pcs front and rear differantial axled end connection.

m3x10mm inbus bolt 2 pcs gear-axle connector assembly.

m3x8mm inbus boldt 2 pcs motor-motor mount plate assembly

m3x30mm inbus bolt and nut 30pcs for body assembly.

m5x110mm akb bolt and nut and washer 2 pcs rear differantial-rear wheel assembly.

m3x20 inbus bolt and nut 8 pcs shock absorber mount

m4x60mm inbus bolt 4 pcs shock absorber assembly(optional)

Rollers:
https://tr.aliexpress.com/item/32249551086.html?spm=a2g0o.productlist.main.23.a53f4a26oBBGlk&algo_pvid=94316151-defa-44df-9b38-2b2076136125&algo_exp_id=94316151-defa-44df-9b38-2b2076136125-11&pdp_npi=4%40dis%21TRY%2110.33%2110.33%21%21%210.31%210.31%21%402101c5c217094039425555691e7cab%2110000001129152164%21sea%21TR%212057127317%21&curPageLogUid=YJXSOSGWEro5&utparam-url=scene%3Asearch%7Cquery_from%3A

Servo:
https://www.amazon.com.tr/gp/product/B0CM937RBV/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Driver and Motor
https://www.amazon.com.tr/gp/product/B0CCHTB7HG/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&th=1

Shock absorber second option.(Center distance:105mm )
https://tr.aliexpress.com/item/1005004448163066.html?spm=a2g0o.order_list.order_list_main.11.649f3d12mlyzBy&gatewayAdapt=glo2tur

Tires(option c)
https://tr.aliexpress.com/item/1005005225082400.html?spm=a2g0o.order_list.order_list_main.37.649f3d12mlyzBy&gatewayAdapt=glo2tur

Axle connection rod second option (2 pcs)(m3 dual cup)
https://tr.aliexpress.com/item/1005004477730236.html?spm=a2g0o.order_list.order_list_main.47.649f3d12mlyzBy&gatewayAdapt=glo2tur

Screw set (1pcs)
https://tr.aliexpress.com/item/1005004477730236.html?spm=a2g0o.order_list.order_list_main.47.649f3d12mlyzBy&gatewayAdapt=glo2tur

Also you need radio control transmitter and reciever, you can buy what type you want.

All of the parts printed and tested. All parts are located separately within files.Each part fits only where it will be installed.

Don't hesitate to contact us if you have any questions.

İf you want any upgrade of design, concact us.

3D printing settings

gears, axles, shock absobers, wheel connection parts:infill density:%100
Another Parts:İnfill density: %25 or less
Table temperature: 50C
Nozzle temperature :215C for PLA
Printing speed: %100(60mm/s)
Support needed.
Gears and connection parts support density:%20-%25
Another parts support density:%8-%10
Adhesion Type: Brim
PLA/ABS accepted.
Total 2.8kg PLA with supports.

Categories

All designs › Game › Auto & moto / Construction toys / Toys

Tags

Advertising

Issue with this design? Report a problem.

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.