This is a easter inspired napkin holder, as you can see :)

Printed with ESun PLA+ White

0.2 layer height,

I've tourned ironing on for the top surfaces, if you don't want to use this feature, then turn it of on the different pieces.

I recommend to run a ironing calibration, to determine the right value for your filament, as it may vary depending on brand and color.

Use gentle force to put the pieces together, they should fit and hold themself in place.

I recommend to use some glue, to secure the pieces.

Edit: 

I've added  a colored profile also with ironing enabled, with the model split into parts for easier coloring. Flow calibration for ironing ist especially important on this profile, because different colors and/or brands will need different flowrates for ironing.

So do your calibration for each filament.

When printing the colored version, be careful when removing from the plate, as the butterfly could come loose from the bunny nose. Happened to me, but you can fix this with a drip of glue.

For those who are fine without ironing, i've included profiles with ironing disabled.

Happy printing