TCG Deckbox - NGC EDITION by Rubiksensei

Rubiksensei

Toys & Games>Board Games

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 10% infill

Designer

24.8 h

3 plates

5.0(3)

0.2mm layer, 2 walls, 10% infill

Designer

9.7 h

3 plates

5.0(1)

Boost

107

151

119

Released

Description

NEW : inserts to store SD cards and game cartridges compatible with this design !

You can also check out my foldable Dice TowerBox made to fit inside my deckboxes !

A kick from 2004 to store your cards !
Up to 130 double-sleeved cards (200 simple-sleeved or 400 sleeveless, 82×96×76mm). No problem to store Yu-Gi-Oh cards as well as Magic and Pokemon.
Clips and pressure fit enclosure, up to 8 3×5ømm magnets to secure a bit more.

💾 Files included 💾
- Top and bottom parts

- Alternative version without magnet holes
- A divider

Still room for improvement on the topology, feel free to leave a comment/suggestion.

💵 A word to pro-printer/seller 💵
Attribution is mandatory. Just add my IG (@rubiksensei) and/or my cults3d page link at the end of the product page.

Comment & Rating (18)

@elfbane5

it printed beautifully. I had one minor issue with the lip on the top on the underside on the back of the “system”. it needs support I think as it was a little saggy and delaminated. it’s just enough the box won’t fully snap closed. I hit it a bit with a lighter and pressed it, but that only helped a little and looks messy. the whole thing though came out awesome.

The designer has replied

@elfbane5

also I moved the wipe towers a nudge away from the main unit so I could print on an A1 mini.

@Rubiksensei

Thank you for the feedback ! You're right I missed this spot !

@FAFO

Replying to @Rubiksensei :

was this fixed? thanks

@a.meyar97

Printed will upload photos shortly overall print was nice and detailed however with the default print profile supports need major work. The underside lacked support structure and came out quite stringy and overweighted, overall great print but needs tweaking for perfection

The designer has replied

@a.meyar97

Why print it upwards and not flat?

@Rubiksensei

Thank you for the feedback ! I'll do some more tweaking with 1 or 2 other filament brands. Maybe I've been lucky with the spool I used Upward was the only orientation to get a perfect top surface (it's not flat, buttons stick out a bit)

(Edited)