Dragon N Fire
!!!!!3mf will be uploaded once upload is fixed!!!!
!!!!I have printed with these settings and they do work!!!
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA PolyLite Red Transmission Distance: 5
PLA PolyLite Orange Transmission Distance: 7.5
PLA PolyLite Lemon Yellow Transmission Distance: 5
PLA+ GST3D White Transmission Distance: 13
Swap Instructions:
Start with Black
At layer #10 (0.52mm) swap to Red
At layer #21 (0.96mm) swap to Orange
At layer #33 (1.44mm) swap to Lemon Yellow
At layer #46 (1.96mm) swap to White for the rest.