EDIT: Added a new block box with storage for the rocker board, die and stand. Also removed the lettering from the stand as it impeded the board from fully rocking. If you have already printed the box I included the 3 storage accessories on their own plate so you can print them and glue them on. I did and it works fine.
Have seen this game in ads and other STL sites and wanted to design my own. I added a box that will hold 21 pieces and you can increase the “Z” by 20mm to add layers or print another box. The bottom of the box and lid has the piece designs, colors and piece numbers for easy storage and game play and an eight sided die is included for play. The rocker must be placed on the base during play or it may never topple.
Game play:
Please remember to rate and comment, Thanks