A1 Mini Purge/Poop Management System by yannickmorand

yannickmorand

3D Printer>3D Printer Parts

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 3 walls, 15% infill

Designer

1.4 h

1 plate

4.4(39)

Boost

185

344

245

Released

Description

I designed this model to manage the poops the printer makes. It guides the poop in the garbage next to the printer. I used the excellent design from thrutheframe but it was taking too much spaces for my liking so I made my own. I took some inspiration from jayburd for the mount. It prints without supports, just slide the part in the other. It can be a bit hard to clip but once done it's pretty sturdy for what it is. You could use glue is you want to make sure it won't move.

Happy printing

Comment & Rating (45)

@3DMJ

Print Profile

0.2mm layer, 3 walls, 15% infill

looks great

@TAADesign

Print Profile

0.2mm layer, 3 walls, 15% infill

Works and fit well!

@moedafer

great 💯👍

@berambolo

Print Profile

0.2mm layer, 3 walls, 15% infill

Works OK. Snapped half of the chute so it doesn't throw too far

@user_1497307519

Print Profile

0.2mm layer, 3 walls, 15% infill

works great

@Mimihomedecorat

Print Profile

0.2mm layer, 3 walls, 15% infill

S emboite bien , juste le petit rebord à l interieur retient parfois un poop et les autres viennent se coincer dessus ce qui fini par remplir le système . Un remix sans ce petit bord serait le bienvenu .

@yannickmorand

This is printed with the Honeycomb pattern

@mark.lg76

Print Profile

0.2mm layer, 3 walls, 15% infill

Other Issues:printed well but gets James frequently

@christopherbenn

Print Profile

0.2mm layer, 3 walls, 15% infill

Looks great, prints fine. If you have a trash can level with the printer, this chute will hit the trash can and damage your print. Even with the removal of the chute extension, this was hitting my trash can on the first 0 - 50 layers. Not sure what the reasoning behind the chute extension piece would be used for unless the machine was on the edge of a table where the trash can would be on the floor. This is not my case, and I would need to print a low profile trash can. Given the amount of filament used for the trash can, I chunked this print into the spare parts bin. Master printer here.

(Edited)

The designer has replied

@yannickmorand

Good point, actually it is designed to be on the edge of a table and throw in the trash next to it on the floor.