Longer Stackable Egg Dispenser by MKCAMC

MKCAMC

Household>Other House Models

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

*Without Brim* 0.2mm layer, 2 walls, 15% infill

Designer

5.5 h

1 plate

5.0(5)

*With Brim* 0.2mm layer, 2 walls, 15% infill

Designer

5.6 h

1 plate

4.3(12)

0.2mm layer, 3 walls, 15% infill

4.9 h

1 plate

Boost

116

262

175

Released

Description

I designed this version 2 of my Stackable Low-Profile Egg Dispenser in resopnse to feedback that I recieved from several people. This version is split into 2 parts which allows it to be printed on small format printers such as the A1 Mini and many others. I also increased the overall assembled length of the dispenser in order to allow for 6 eggs to be placed in it rather than 5. As in the original there is a slop to feed the eggs forward and a lip to keep them from falling out. Assembly is easy. Apply glue to either piece and then line up the fins and slots in between the 2 halves. You can print and stack as many of these as you need. I'm including a profile that has a brim and a profile that doesn't have a brim. I recommend using the brim, but it will take a little post processing to kae sure the brim material is cleared out so each section can stack. Enjoy!

Comment & Rating (22)

@Touwaka

Stacks well, prints well - no issues here!

The designer has replied

@MKCAMC

I’m glad it’s working well for you!

@Picture_it

Print Profile

*With Brim* 0.2mm layer, 2 walls, 15% infill

strong, easy to glue the halves together and stacks nicely.

@paschi69

Print Profile

*With Brim* 0.2mm layer, 2 walls, 15% infill

Schön zu drucken und echt praktisch

@BreeRazor

Print Profile

*With Brim* 0.2mm layer, 2 walls, 15% infill

top

(Edited)

@whereamibro

Print Profile

*Without Brim* 0.2mm layer, 2 walls, 15% infill

Pretty great, designed with wiggle room for L/XL eggs. THIS IS NOT A DISPENSER. Eggs wont roll down when you remove one off them.

@JMEads

Print Profile

*With Brim* 0.2mm layer, 2 walls, 15% infill

works well. Would be 5 stars if they were angled a little so eggs rolled forward when one is removed.

@Anemi.forge

Thanks for this awesome design. I printed them and it works well. Just an idea, can you add the fins to the front face of the front piece? so we can extend this to a 3-piece dispenser for deeper fridges? by printing just the front piece.

(Edited)

@alanrutkowski14

Print Profile

*With Brim* 0.2mm layer, 2 walls, 15% infill

The designer has replied

@MKCAMC

Is there an explanation behind this rating?

@alanrutkowski14

so many failed prints, what was the item attemped

@qmracer01

Print Profile

*Without Brim* 0.2mm layer, 2 walls, 15% infill

@mikmac

Boosted

Print Profile

*With Brim* 0.2mm layer, 2 walls, 15% infill

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.