Bambu LED Lamp for A1 Mini - with remote control suggestion Remixed by Marcus T

Remixed by

Marcus T

3D Printer>3D Printer Accessories

Print Profile(4)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

both version, 0.2mm layer, 2 walls, 15% infill

Designer

49 min

1 plate

4.5(8)

0.2mm layer, 3 walls, 20% infill

Designer

42 min

1 plate

4.7(3)

Straight version, 0.2mm layer, 3 walls, 20% infill

Designer

42 min

1 plate

5.0(1)

PETG: 0.2mm layer, 4 walls, 20% infill

1.2 h

1 plate

5.0(3)

Boost

111

Released

Description

The lighting of A1/A1mini is poor, and we need another source to enhance that.

The LED Lamp Kit 001 is a reasonable resource after you played with that.

For wireless controlling, you may find some controllers like this,

*update 23/12/27

I got feedback that the fixture structure of A1 is not identical to A1mini, so that it won't work for A1.

*update

I uploaded the wrong version; the ball part was 1mm larger. The printing profile is replaced with the correct one.

I am sorry to the early four downloaders, and please re-print the fixture if you already started it.

** There is a second print profile, a straight version, for people who already have other parts by the side, for example, the Wyze Cam.

Comment & Rating (26)

@KathrynCramer

Print Profile

both version, 0.2mm layer, 2 walls, 15% infill

I printed this A1 light support knowing that the light I planned to use was probably not compatible, which is to say I wanted to use a puck light. But I managed to make it work. I was able to easily adapt this design to a battery powered puck light.

The designer has replied

@MarcusT

I am so glad to see this helped! I think that I should take some time to fix this for the compatibility for the A1, I will let you know when it's done.

@MarcusT

I am so glad to see this helped! I think that I should take some time to fix this for the compatibility for the A1, I will let you know when it's done.

@Moneyman89

Can you post the link to the light?

@lion7718

PETG Profile Above.

@BennyBoots

Print Profile

PETG: 0.2mm layer, 4 walls, 20% infill

this works Great on my A1 mini. it was too tight to fit on my A1 though, but that's okay because i only needed this for my Mini. I printed using BL PETG BASIC "Nature" color.

@MAFIA_SKULL

Print Profile

0.2mm layer, 3 walls, 20% infill

impeccable

@KathrynCramer

I wanted to use it with a battery-operated puck light and did a print, not expecting that my plan would work first time out. The light the model is built for is smaller than the puck lights I have. What I did was use the mounting plate backwards and I printed out an additional 60 mm plate with two holes in it that fit into the slot for the light. I ran a twisty-tie thought the mounting holes on the back of the puck light, through the originally printed back plate and through my add-on plate. That works. For good measure, I added another twisty tie to make sure vibrations didn't dislodge the light arm from the machine. I may do a remix doing a more formal version of a puck-light adaptation, though this looks to work fine. I printed it with Atomic's filament "Chameleon." I've included a screenshot of my added plate.

(Edited)

@MarcusT

I uploaded the wrong version; the ball part was 1mm larger. The printing profile is replaced with the correct one. I am sorry to the early four downloaders, and please re-print the fixture if you already started it.

(Edited)