Work well, kids will love this (or me when I DESTROY THEM). A little over engineered and could save time/filament with some adjustment, but you know your printer best., I printed with the following settings. Filament: Bambu Lab Matte PLA Print settings Plates first layer:0,2 mm Layer height:0,2 mm Infill: 15% Gyroid Foot with Baskets first layer: 0,2 mm layer height: 0,2 mm infill: 15% Gyroid Brim: No Chips first layer: 0,2 mm layer height: 0,2 mm infill: 15% Gyroid Ironing all top surfaces (7% flow @90 degrees) Brim: No (with blue/white & Orange/Black)

Nice idea and cool model. But for me the slot for the coins was a little bit to tight. Some of the coins got stuck. To improve that we put double sided tape between the two parts so that the gap is a little bit bigger.