Gridfinity Battery Boxes AA & AAA by MakerBunny

MakerBunny

Tools>Organizers

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 10% infill

Designer

6.4 h

1 plate

4.8(21)

Only AA battery box

2.9 h

1 plate

Only AAA battery box

3.2 h

1 plate

Boost

117

238

157

Released

Description

Two Battery Boxes for AA & AAA Batterys.
Prints like a charm.
Each box can be printed individually.
I usualy print my Gridfinity boxes with a coler codes Brim, but you can, of course, print it in one solid colour an material.

Comment & Rating (28)

@routedVector

Print Profile

0.2mm layer, 2 walls, 10% infill

Great addition to gridfinity

The designer has replied

@MakerBunny

thank you for sharing and the pictures.

@DavidTran

Print Profile

0.2mm layer, 2 walls, 10% infill

Works great! The edges are a bit tight (probably cause of the brim) but they'll still fit -- just requires a bit of force.

(Edited)

The designer has replied

@MakerBunny

thanks for sharing your experience

@fijter

Print Profile

0.2mm layer, 2 walls, 10% infill

Good print, the fit of the batteries on the sides, especially the corners, is very tight due to the overhanging ledge but it works :)

@nokismenotu

Print Profile

0.2mm layer, 2 walls, 10% infill

nice simple storage

(Edited)

@twoks

The top lip makes the outside rows unusable on both the AA and AAA. Are batteries a different where I'm at? I'm in the US. And if you force it in there it damages the coating on the battery. Please address this problem.

The designer has replied

@MakerBunny

Thanks for your comment. As shown on the pictures it works in other cases, but I will look into that.

@twoks

Replying to @MakerBunny :

Another possibility is that I use rechargeable batteries and have noticed that some manufacturers, specifically Amazon Basics batteries, are noticeably bigger in OD. I would be happy to measure my batteries and share that with you if you are interested.

@MakerBunny

Replying to @twoks :

sure. that would bei nice to compare sizes.