Arizona Cardinals Hueforge
Not super happy with it, the yellow was funky on the beak and the white has a yellow tint but its not bad. I may change it in the future.
Don't Forget the frame
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PLA BambuLab Basic Yellow Transmission Distance: 6
PETG JAYO White Transmission Distance: 6
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Scarlet Red
At layer #11 (0.96mm) swap to Yellow
At layer #18 (1.52mm) swap to White for the rest.
Please "Like", review, follow and upload make.
I spend a lot of time designing and allow it all to be used for free (including commercially).
If you'd like to help me out, below are the possible ways. Thank you in advance!
https://www.buymeacoffee.com/dohara1985o
Venmo: Dohara1985
Paypal: @Dohara1985